"World's Most Complete Market Research Reports Repository"

Battery is made up of raw materials like cobalt, graphite, and lithium. Cobalt: Today, about 40% of cobalt is used to make rechargeable.
North America led the global market owing to stringent environment regulations, which has tightened the emission rules coupled with high battery consumption ....

Vibratory Rammers, also known as Tamping Rammers, are designed for compaction of cohesive and mixed soils in confined areas.Their design characteristics make them ideal for backfills around foundations, forms, pipelines and other trench work, including sub-grade preparation for concrete or asphalt.<....

Polyaluminium Chloride or Poly alumnium chloride, also called PAC, is a new type high performance inorganic macromolecule flocculating agent. It is an inorganic polymer synthesized by aluminum chloride, aluminum hydroxide, alumina or other inorganic aluminum compounds with hydrochloric acid. Poly al....

Roadmarking Paint or Road Marking Paint is a kind of paint used to paint road mark. Paint, sometimes with additives such as retroreflective glass beads, is generally used to mark travel lanes. It is also used to mark spaces in parking lots or special purpose spaces for disabled parking, loading zone....

The global Waxed Paper Packaging market was valued at xx million US$ in 2018 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.
This report focuses on Waxed Paper Packaging volume and value at global level, regional level and company level. From....

Dioctyl Phthalate (DOP), oily transparent liquid Slightly with odor, is widely used as a plasticizer, good overall performance, and good compatibility with polyvinyl chloride, synthetic resins, cellulose nitrate and other rubber. is widely used in all kinds of soft PVC plastics such as films, leath....

Dipropylheptyl Phthalate (DPHP), Di(2-propylheptyl) phthalate, Bis(2-propylheptyl) benzene-1,2-dicarboxylate or di(propylheptyl) orthophthalate, commonly abbreviated DPHP, is an organic compound with the formula C28H48O4. It is a phthalate and is the diester of phthalic acid and the 10-carbon branch....

Polymer concretes are a type of concrete that use polymers to replace lime-type cements as a binder. In some cases the polymer is used in addition to portland cement to form Polymer Cement Concrete (PCC) or Polymer Modified Concrete (PMC).
The US is the current leader in the world for concrete....

UV-Curable Adhesives is a adhesives in which ultraviolet light and visible light is used to initiate a photochemical reaction.
UV adhesives are produced using a variety of resins such as acrylic, polyurethane, silicone, epoxy and others. Among these the high bond strength provided by acrylic m....

Solid lubricants are materials that, despite being in the solid phase, are able to reduce friction between two surfaces sliding against each other without the need for a liquid oil medium.
The global focus of solid/dry lubricants is currently on Asia-Pacific as well as the Middle East countrie....

Prepreg is the common term for a reinforcing fabric which has been pre-impregnated with a resin system.
Para-aramids provide unique combinations of toughness, enhanced high tenacity and modulus of elasticity, as well as exceptional thermal stability. Therefore, the end-uses of para-aramids cov....

Acrylic adhesive is a resin-based adhesive that is comprised of acrylic or methylacrylic polymers. It is rather complicated to produce acrylic adhesives as they must be formed into a polymer, suspended in a catalyst, and cured. Acrylic adhesives are very strong and efficient at bonding multiple obje....

Building products, rather, support and make building materials work in a modular fashion. \"Building products\" may also refer to items used to put such hardware together, such as caulking, glues, paint, and anything else bought for the purpose of constructing a building.
The telecom, urban in....

Industrial greases are used for the lubrication in various machines to reduce the wear and tear from sustained use of such machinery. They are made from mixing base oils, additives and thickeners. Industrial greases are used to maintain the machines used in the manufacturing sector.
Even thoug....

Floating solar panels are also referred as floating solar farms or floating solar arrays, referring to an array of photovoltaic (PV) panels on a structure that floats on a water body typically a lake or a reservoir. A floating solar panel system built on water conserves land space increases the over....

Epoxy resins are a group of synthetic resins, which are used to make adhesives and plastics.
The construction segment accounts for the maximum market share and will continue to dominate the market in the forthcoming years.The global Epoxy Resins market was valued at xx million US....

Corrosion and scale inhibitors are special kind of chemicals used to prevent or control corrosion or scale formation in metals.
The corrosion inhibitors segment accounted for the major shares of the cooling water treatment chemicals market. Factors such as the wide usage of corrosion inhibitor....

In electric power distribution, a copper busbar (also bus bar, and sometimes misspelled as buss bar or bussbar) is a copper strip or bar, typically housed inside switchgear, panel boards, and busway enclosures for local high current power distribution.
The demand for copper busbars and profile....

Continuous basalt fibers (CBF) are obtained by melting basalt rocks and forcing them through small pores. The rocks are crushed into powder, and then passed through a furnace, followed by drawing them into strands using platinum rhodium drawing filament laminate. They possess remarkable acid and alk....

Superplasticizers, also known as high range water reducers, are chemical admixtures used where well-dispersed particle suspension is required. Concrete superplasticizer is used to concrete or mortar.
Superplasticizers, also known as high range water reducers, are chemical admixtures used where....

Shea butter is defined as the edible fat that is extracted from the shea kernels or shea nuts of Vitellaria paradoxa, commonly known as the shea tree. Shea butter has various industrial applications, such as in food processing, cosmetics, pharmaceuticals, and others. Cosmetic shea butter is used as ....

Solid wood flooring is a solid piece of wood from top to bottom. The thickness varies from ¾” to 5/16”. Solid wood flooring can be installed above or on grade, and can be sanded and refinished several times during its service life.The global Solid Wood Flooring market was valued at xx ....

Gypsum-Fiber Board, other name paperless drywall or fiber-gypsum board. It is composed of plaster (hemihydrate), fibers and additives with water combination. Which is not only can be used in the area that paper drywall ever used in, but also used in other new fields for its high strength. Such as gy....

The global Liquid Epoxy Resins market was valued at xx million US$ in 2018 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.
This report focuses on Liquid Epoxy Resins volume and value at global level, regional level and company level. From a g....

Polymer products, polyols and polyurethane, find widespread applications across the world. Polyether polyols and polyester polyols are some of the commercially available polyol products. Coatings, flexible foam, adhesives and sealants, rigid foam, elastomers, etc. are some of the commercially availa....

In order to stay ahead of the curve in the global iron and steel slag market, keen players are seeking out partnerships with original equipment manufacturers (OEM) in different end-use industries, namely building and construction, railways, fertilizers, etc. They are also leveraging latest technolog....

The global New Materials for Laser Crystals market was valued at xx million US$ in 2018 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.
This report focuses on New Materials for Laser Crystals volume and value at global level, regional level a....

The global AC Asynchronous Motors market was valued at xx million US$ in 2018 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.
This report focuses on AC Asynchronous Motors volume and value at global level, regional level and company level. Fr....

Titanium tubing are suitable for environments and applications where the properties of stainless steels are not sufficient.The global Titanium Tubing market was valued at xx million US$ in 2018 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.....

Composite tube (compound tube) suitable for applications where the conditions outside and inside the tube require material properties that cannot be met by one material only.The global Composite Tube market was valued at xx million US$ in 2018 and will reach xx million US$ by the end o....